Loading Lift Tables

Gandhi Loading Lift Tables comply with the European Safety of Machinery standards EN 292, Machinery Directive 2006/42/CE and Safety requirements for lift tables EN 1570.

All models include:

Aluminium safety bar, stopping descent of the platform on contact with obstructions
Safety clearance between scissors to prevent trapping during operation
Safety check valve to stop the lift table lowering in the unlikely event of a hose break
Protection against overloading
Low voltage control box with up-down buttons and emergency stop
Maintenance props (for safe maintenance operation)
Removable lifting eyes to facilitate handling and lift table installation.

Used to load and unload vehicles by pedestrian or fork lift trucks without a loading dock and designed to operate with maximum safety for off-centred crossing loads

Technical features:

Safety tread top platform surface
Max. 15 cycles per hour, one shift a day (for more intense operations please consult with us)
Single acting hydraulic cylinders with drainage
Upper travel limit switch
Check valve on each cylinder for higher stability
Self lubricating bearings on pivot points
Hydraulic power pack inside the table provided with relief valve against overloading and compensated flow valve for controlled lowering speed
Electrical equipment controlled by electronic system, with low voltage transformer and thermal overload protection
Wide range of options available such as wheel stops, goal post barriers, safety handrails, manual bridge plates etc. to meet specific requirements

Technical Specifications

Model Stroke	Capacity (in Kg)	Stroke E mm	Platform A x B mm	Collapsed Height H mm	Motor (Kw)	Cylinder (nos)
SLT.40.T000	4000	1600	2500 x 2000	500	4	2
SLT.40.T010	4000	1600	3000 x 2000	500	4	2
SLT.40.T020	4000	1800	3000 x 2000	550	4	2
SLT.40.T030	4000	1800	3000 x 2200	550	4	2
SLT.40.T040	4000	1800	3500 x 2200	550	4	2
SLT.40.T050	4000	2000	3500 x 2000	550	4	2
SLT.40.T060	4000	2000	3500 x 2200	550	4	2
SLT.40.T070	4000	2000	4000 x 2200	550	4	2
SLT.60.T000	6000	1500	2500 x 2000	550	4	2
SLT.60.T010	6000	1800	3000 x 2000	600	4	2
SLT.60.T020	6000	1800	3000 x 2200	600	4	2
SLT.60.T030	6000	1800	3500 x 2200	600	4	2
SLT.60.T050	6000	2000*	3500 x 2000	600	4	2
SLT.60.T060	6000	2000*	3500 x 2200	600	4	2
SLT.60.T070	6000	2000	4000 x 2200	600	4	2
SLT.80.T000	8000	1500	2500 x 2000	600	4	2
SLT.80.T010	8000	1800	3000 x 2000	650	4	2
SLT.80.T020	8000	1800	3000 x 2200	650	4	2
SLT.80.T030	8000	1800	3500 x 2200	650	4	2
SLT.80.T050	8000	2000	3500 x 2000	650	4	2
SLT.80.T060	8000	2000	3500 x 2200	650	4	2
SLT.80.T070	8000	2000	4000 x 2200	650	4	2
SLT.A0.T000	10000	1500	2500 x 2000	650	5.5	2
SLT.A0.T050	10000	2000	3500 x 2000	700	5.5	2
SLT.A0.T060	10000	2000	3500 x 2200	700	5.5	2
SLT.A0.T070	10000	2000	4000 x 2200	700	5.5	2